As digital transmission speeds increase, designers use various techniques to improve the signal-to-noise ratio at the receiver output. One such technique is the Decision Feedback Equalizer (DFE) scheme, commonly used in high-speed Serializer-Deserializer (SerDes) circuits to mitigate the effects of channel noise and distortion. The DFE scheme relies on decisions about the levels of previous symbols (high/low) to correct the current symbol. This allows the DFE to account for distortion in the current symbol that is caused by the previous symbols.
However, DFE error propagation can occur when feedback signals are incorrect. Following are some of the situations that contribute to DFE error propagation. DFE circuits operate by using feedback to equalize the received signal, but this feedback can also amplify noise and distortion in the signal. In some cases, the feedback can overemphasize certain frequencies, leading to an increase in noise at those frequencies and an increase in the Bit Error Rate (BER). The mechanism also relies on accurate timing to make decisions about the incoming data. If there are timing errors in the feedback loop, these errors can propagate and cause additional errors in the received data. Nonlinear distortion in the transmission channel can also cause DFE circuits to make incorrect decisions about the received data. These errors can then propagate through the feedback loop and cause additional errors in the data. As the DFE scheme makes decisions based on previous decisions, errors in the feedback loop accumulate over time.
As noted above, DFE error propagation can lead to increased BER and reduced signal integrity. Increased BER in turn leads to data errors and reduced system performance. Reduced signal integrity results in increased jitter and reduced eye height, leading to errors in data transmission. As a result, DFE error propagation can significantly impact the performance of high-speed SerDes circuits and must be carefully managed to ensure reliable data transmission.
But existing statistical simulation methods cannot properly consider DFE feedback, and time-domain simulations become impractical for low error probabilities. A whitepaper by Siemens EDA presents a statistical solver that can find bit error ratio or symbol error ratio in the presence of isolated and burst DFE errors. The solver can accurately consider transmit and receive jitter, crosstalk aggressors, noise, and other impairments, and is useful in choosing forward error correction (FEC) schemes and parameters. The paper defines the essential building blocks of the statistical solver, including the main elements of statistical analysis, the convolution term for DFE feedback, the symbol error probability matrix, and the flow to find BER/SER metrics. It also discusses the use of a modified iteration process to find the probability distribution of symbol error groups and presents experimental results of the statistical solver.
The following are some excerpts from the whitepaper.
Building statistical eye that includes DFE errors
The method is considered a Markov chain with a transition operator defined by a function that transforms known error probabilities into new error matrices measured from the eye diagram. The process involves building a statistical eye diagram from which error probabilities are calculated. The iterations continue until the error probability matrices become equal up to machine precision. The iterations are consistent and converge to the same solution regardless of initial settings. Two examples are given to illustrate the convergence of the iterations with statistical solver in the loop. The first example is the simulation of a 200GBASE-CR4 link, while the second is the CEI VSR channel with 4 taps DFE.
Choosing FEC parameters
The size of FEC needed to correct the error groups can be determined by analyzing the probability parameters distribution of error groups found from statistical simulation.
The simulations with FEC demonstrate the importance of knowing the burst error distributions for the proper choice of FEC parameters while keeping the FEC-induced latency to a minimum. The statistical analysis results can be relied upon for the purpose of FEC parameter optimization for a large variety of channels.
خلاصہ
The whitepaper presents a novel statistical simulation method that considers the effect of DFE error propagation in SerDes links. Simulation speeds are sufficient to make this approach a routine part of the design process that require multiple channel compliance evaluations and FEC parameter optimization. You can download the entire whitepaper from here.
بھی پڑھیں:
آٹوموٹو سیفٹی کے لیے ہارڈ ویئر روٹ آف ٹرسٹ
تصدیق کی پیچیدگی کے انتظام پر سیمنز ای ڈی اے
سیمنز کی کلید عالمی ترجیحات پر زور دیتی ہے۔
اس پوسٹ کو بذریعہ شیئر کریں:
- SEO سے چلنے والا مواد اور PR کی تقسیم۔ آج ہی بڑھا دیں۔
- پلیٹو بلاک چین۔ Web3 Metaverse Intelligence. علم میں اضافہ۔ یہاں تک رسائی حاصل کریں۔
- ایڈریین ایشلے کے ساتھ مستقبل کا نقشہ بنانا۔ یہاں تک رسائی حاصل کریں۔
- ماخذ: https://semiwiki.com/eda/327574-mitigating-the-effects-of-dfe-error-propagation-on-high-speed-serdes-links/
- : ہے
- $UP
- a
- ہمارے بارے میں
- اوپر
- اکاؤنٹ
- جمع کرنا
- درست
- درست طریقے سے
- ایڈیشنل
- کی اجازت دیتا ہے
- تجزیہ
- تجزیہ
- اور
- نقطہ نظر
- کیا
- AS
- At
- آٹوموٹو
- کی بنیاد پر
- BE
- بن
- بٹ
- بلاکس
- عمارت
- by
- حساب
- کر سکتے ہیں
- نہیں کر سکتے ہیں
- احتیاط سے
- مقدمات
- کیونکہ
- وجہ
- کچھ
- چین
- چینل
- چینل
- انتخاب
- منتخب کریں
- عام طور پر
- تعمیل
- غور کریں
- سمجھا
- سمجھتا ہے
- متواتر
- جاری
- شراکت
- تقارب
- کنورجنس
- موجودہ
- اعداد و شمار
- فیصلہ
- فیصلے
- کی وضاحت
- وضاحت کرتا ہے
- مظاہرہ
- ڈیزائن
- ڈیزائن کا عمل
- ڈیزائنرز
- کا تعین
- ڈیجیٹل
- تقسیم
- تقسیم
- ڈاؤن لوڈ، اتارنا
- اثر
- اثرات
- عناصر
- کو یقینی بنانے کے
- پوری
- خرابی
- نقائص
- ضروری
- اندازہ
- مثال کے طور پر
- مثال کے طور پر
- موجودہ
- آنکھ
- آراء
- مل
- پہلا
- بہاؤ
- کے بعد
- کے لئے
- آگے
- ملا
- سے
- تقریب
- دی
- گلوبل
- گروپ کا
- اونچائی
- یہاں
- HTTPS
- اثر
- اہمیت
- کو بہتر بنانے کے
- in
- شامل ہیں
- سمیت
- موصولہ
- اضافہ
- اضافہ
- ابتدائی
- سالمیت
- الگ الگ
- IT
- تکرار
- تکرار
- رکھتے ہوئے
- اہم
- جاننا
- جانا جاتا ہے
- بڑے
- تاخیر
- قیادت
- معروف
- لیڈز
- سطح
- LINK
- لنکس
- لو
- مشین
- مین
- بنا
- بناتا ہے
- میں کامیاب
- مینیجنگ
- میٹرکس
- زیادہ سے زیادہ چوڑائی
- میکانزم
- طریقہ
- طریقوں
- پیمائش کا معیار
- کم سے کم
- تخفیف کریں
- تخفیف کرنا
- نظر ثانی کی
- ایک سے زیادہ
- ضرورت
- نئی
- شور
- کا کہنا
- ناول
- of
- on
- ایک
- کام
- آپریٹر
- اصلاح کے
- دیگر
- پیداوار
- پر
- کاغذ.
- پیرامیٹر
- پیرامیٹرز
- حصہ
- کارکردگی
- پلاٹا
- افلاطون ڈیٹا انٹیلی جنس
- پلیٹو ڈیٹا
- پوسٹ
- صحت سے متعلق
- کی موجودگی
- تحفہ
- پچھلا
- امکان
- عمل
- مناسب
- مناسب طریقے سے
- مقصد
- شرح
- تناسب
- پڑھیں
- وصول
- موصول
- کم
- کم
- بے شک
- قابل اعتماد
- کی ضرورت
- نتیجہ
- نتائج کی نمائش
- جڑ
- اسی
- سکیم
- منصوبوں
- دوسری
- ترتیبات
- siemens ڈاؤن لوڈ،
- اشارہ
- سگنل
- نمایاں طور پر
- تخروپن
- حالات
- سائز
- حل
- کچھ
- رفتار
- شماریات
- اس طرح
- کافی
- علامت
- کے نظام
- نلیاں
- تکنیک
- کہ
- ۔
- یہ
- کے ذریعے
- وقت
- وقت
- کرنے کے لئے
- منتقلی
- ترسیل
- بھروسہ رکھو
- ٹرن
- استعمال کی شرائط
- استعمال کیا جاتا ہے
- مختلف اقسام کے
- مختلف
- توثیق
- کی طرف سے
- جس
- جبکہ
- Whitepaper
- ساتھ
- زیفیرنیٹ