टेस्ला ने सस्पेंशन सेपरेशन के लिए मॉडल 3एस के छोटे बैच को वापस बुलाया

टेस्ला is को याद करते हुए 422 मॉडल 3 sedans built for the 2018 and 2019 model years to address a potential suspension issue. Some vehicles may exhibit loosening of the fasteners that hold the front suspension lateral links to the subframe. If these work themselves loose to the point where the lateral link can separate from the subframe, it can result in a sudden loss of control of the car. 

“If a fastener becomes loose enough or separates from the sub-frame such that the lateral link separates from the sub-frame, the wheel alignment could shift and cause instability, which may adversely impact vehicle controllability and increase the risk of a collision,” Tesla’s defect report कहा हुआ। 

Tesla’s report indicates that the fasteners are loosening on their own over time, and while the company did not disclose exactly why only certain fasteners exhibit the problem, its report said that it narrowed the recall population to only those vehicles whose build records indicate “certain torque and angle record characteristics” that correlate to customer reports of loosening hardware. The earliest customer complaints date back to 2019, the report said. 

“Tesla Service will inspect affected vehicles for proper torque of the fasteners that secure both front suspension lateral links to the sub-frame. If a loose or missing fastener is found during the inspection, Tesla Service will re-torque the fastener to the correct specification. In the unlikely event that vehicle damage from a loose or missing fastener is found during the inspection, Tesla Service will replace the damaged component.”

This one definitely can’t be remedied by an over-the-air update. Tesla is distributing notices to owners of the affected cars; those should be delivered in May. Customers who paid to have this issue fixed prior to the recall are eligible for reimbursement and should contact their Tesla service representative to make arrangements. 

संबंधित वीडियो

.embed-कंटेनर {स्थिति: रिश्तेदार; गद्दी-नीचे: 56.25%; ऊंचाई: 0; अतिप्रवाह: छिपा हुआ; अधिकतम चौड़ाई: 100%; } कंटेनर आइफ्रेम, .embed कंटेनर वस्तु, एम्बेड .embed-कंटेनर {स्थिति .embed: निरपेक्ष; शीर्ष पर: 0; वाम: 0; चौड़ाई: 100%; ऊंचाई: 100%; }

• एसईओ संचालित सामग्री और पीआर वितरण। आज ही प्रवर्धित हो जाओ।
• प्लेटोब्लॉकचैन। Web3 मेटावर्स इंटेलिजेंस। ज्ञान प्रवर्धित। यहां पहुंचें।
• स्रोत: https://www.autoblog.com/2023/04/07/tesla-suspension-fastener-recall/